We – EPG Group the biggest agricultural gearbox and pto manufacturing facility in China with 5 distinct branches. For much more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
Close up of two yokes with the universal joint. Observe the slight oozing of grease from the UJ seal finishes, the clump of grease is from inside of the yoke splined shaft location –Drive (outer) yoke has a female (normal spline) hole and “Y” condition finish that is the universal joint (UJ) mount. –UJ is a cross shaped casting possessing roller bearings enclosed with caps at all 4 points and is held into the yoke with 4 “C” clips –Inner yoke and travel shaft is yet another yoke welded to the drive conclude, of the push shaft. –Driven shaft and interior yoke is the pushed shaft that rides within of the generate shaft and has a yoke welded at the driven stop –UJ one more UJ as previously mentioned The PTO shaft provided with all Victory Tractor mowers has a lengthier extension than the common PTO Shaft. The added duration is required since of the significantly achieving movement of the mowers to the proper of the tractor. 2005 grand cherokee entrance generate shaft The pto velocity reducer organization 2001 ford f150 travel shaft was ford 8n pto shaft trapped certified personalized driveshaft value by vw t5 stub shaft replacement ISO9001:2008 monsieur driveshaft Good quality drive shaft grand livina one.8 Administration john deere pto adapter Method. muncie pto mounting bolts Adhering to “Survival by Top quality, Advancement by Technologies & Credit rating”, The business will constantly increase item performance to meet the escalating client requirements in the arduous design of perform.
3WPZ-1200G type self propelled spray increase sprayer
3WPZ-1200G sequence of sprayer is suitable for spraying the medicament for the planter of bean, corn, cotton, grain.
Also for garden,fruiter,vegetable, road aspect tree. The ability could be 1200L, the spraying width could be thirteen.1-16m with 53hp.
Benefits:
•This type of boom sprayer is a tractor mounted sprayer.
•Wide operating scope,spraying for bean,cotton,corn and many others.
•Wide spraying with to be 16m max.and the operating angle of this tractor sprayer could be modified.
•The potential of mounted increase sprayer could be modified to fulfill diverse require from the consumer.
Model | 3WPZ-1200G self-propelled spray increase sprayer | Pump Type | Plunger pump |
Engine Design | 4L68 (Changchai) turbocharged diesel engine | Pump Product | OS-5200 |
Power / Pace | 53 hp 2400r / min | Pump Pressure | 0-45kgf/cm² |
Displacement Degree | China III | Pump Flow | 220-240L / Min |
Gear | Forward equipment four,reverse gear one | Pump Speed | 600-800r / min |
Drive Manner | Four-wheel push | Tank Capability | 1500L |
Steering Manner | Hydraulic steering | Spray Height | 0.five-3. m |
Mixing Approach | Circulating h2o mixing | Nozzle Model | No.three |
Folding Method | Hydraulic folding | Spray Angle | 110° |
Spray Width | 16 m | Nozzle Circulation | 1.2L / min |
Vertical Top | 1.8 m(customizable) | System Operate Stress | 0.three-.5Mpa |
Wheel Observe | 1.95-2.6 m(adjustable) | 3 Filtration Method | Tank inlet, pump inlet, nozzle |
Operating Effectiveness | 21-30 acres / hour | Battery | 12v / 120AH |
Walking Speed | ≤25Km / h | Front Tire Design | Tractor tires nine.5-24 |
Overall Dimension | 5800 mm x 2900 mm x 3700 mm | Rear Tire Design | Tractor tires 9.five-24 |
Weight | 3811Kg | Water Tank | 15L |
Q:Are you a factory or investing company?
A:We are a manufacturing facility.
Q: How does your manufacturing unit do concerning top quality control?
A: Quality is precedence. we usually say wonderful relevance to good quality managing from the extremely beginning to the extremely conclude.
Q: Do you have a product accessory?
A: Yes, we have the accessories of the product.
Q:Can you customize the item?
A:We can customize the solution.
Q: What’s your payment terms?
A: Payment terms is T/T or L/C,We accept all reasonable payment.
Q: How about delivery time of your machine?
A: The delivery time is in 60 working days. It depending your quantity.
The use of unique equipment manufacturer’s (OEM) component figures or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our firm and the detailed substitution parts contained herein are not sponsored, accepted, or created by the OEM.