Tag Archives: pto gearbox price Vereeniging South Africa

Best made in China – replacement parts – agricultural gearbox manufacturer in China China john deere mx7 gearbox Vereeniging South Africa Cheap Tractor 30HP 4WD Mini Tractor Lt304 Price with ce certificate top quality low price suitable for Tractor, Agricultural machines, right angle pto shaft drive

Best made in China - replacement parts - agricultural gearbox manufacturer in China China john deere mx7 gearbox Vereeniging South Africa Cheap Tractor 30HP 4WD Mini Tractor Lt304 Price with ce certificate top quality low price suitable for Tractor, Agricultural machines, right angle pto shaft drive

We In this way, our merchandise have ongoing to acquire marketplace acceptance and customers fulfillment above the past number of several years.- EPG Group the greatest agricultural gearbox and pto manufacturing unit in China with 5 different branches. For far more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

China Low cost Tractor 30HP Four wheel drive Mini Tractor Lt304 Cost

Product Description

Adopt Xihu (West Lake) Dis. engine, good reliability, large reserves of torque, low fuel consumption, high economic efficiency

Gearbox using 4 × (2 +1) engaging sleeve, shuttle-action gearshift , there are 8 forward gears, 4 reverse gears, reasonable match between the gears, and have high efficiency

Using an independent power output device, smooth transmission, large capacity, speed (540/720, 540/1000 rev / min) for selection to meet the complex operational requirements

Using an independent circuit of hydraulic steering control system, manipulating flexible, reliable, and save energy

Using disc brakes, a large braking torque, the braking effect is good

Final drive with planetary gear mechanism, compact structure, large reduction ratio

The new streamlined appearance, generous, modern, fashion

Parameter

Tractor Model		LT300	LT350	LT304	LT354
Driver Type		4×2	4X4	4X2	4X4
Dimension L×W×H(mm)		3590X1485X1940
Wheel base(mm)		1705		1760
Front wheel tread(mm)		1100-1400		1200
Rear wheel tread(mm)				1100-1400
Mini ground clearance(mm)		1410	1480	1620	1640
Mini turning radius	Unilateral brake(m)	two.eight
	Not unilateral brake(m)	three.2		three.4
Mini Using Weight(KG)		1410	1480	1620	1640
Numbers of the gear		8F+4R
Speed	Forward(kw/h)	2.07-27.08	two.25-29.53	two.07-27.08	two.twenty five-29.fifty three
	Reverse(kw/h)	3.07-9.35	3.34-10.twenty	3.07-9.35	3.34-10.twenty
Motor	Product	YD485T-C075	YND490T-C053	YD485T-C075	YND490T-C053
	Marked power (KW)	22.one	twenty five.7	22.1	25.seven
	Rated revolution (r/min)	2200
Tires type	Front	5.5-16		6.5-sixteen	7.5-sixteen
	Rear	eleven.2-24	eleven.2-28	eleven.2-24	11.2-28
Steering	Hydraulic front wheel steering
Max. lifting capacity( KN )		five	five.8	five	5.8
PTO	Type	Postposition, No Detached
	Speed (r/min)	540/1000 6 Spine
	Power(kw)	≥18.seventy eight	≥21.eighty five	≥18.seventy eight	≥21.85
Control type of plough depth		Force & Position Control
Front / rear Ballast (kg)		80/eighty	eighty/100	eighty/eighty	eighty/100
Discover: All above parameters are subject to change without notice because of rapid development of products.

image

Packaging & Shipping

The use of original gear manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our organization and the outlined substitution areas contained herein are not sponsored, approved, or produced by the OEM.

Lindsay made in China – replacement parts – reverse pto gearbox Vereeniging South Africa Electric Agricultural Center Pivot Water Sprinkler System for Farm Irrigation with ce certificate top quality low price

Lindsay made in China - replacement parts - reverse pto gearbox Vereeniging South Africa Electric Agricultural Center Pivot Water Sprinkler System for Farm Irrigation with ce certificate top quality low price

We EPG will always adhere to it enterprise spirit of being practical, innovative, efficient and excellent to make the top ept transmission drive.- EPG Group the biggest agricultural gearbox and pto factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

CENTER PIVOT IRRIGATION SYSTEM

PRODUCT INTRODUCTION
The DYP series center pivot irrigation system is made up of center trestle table ,trestle -tower vehicle ,sprinkler truss,endmost ,cantilever ,and synchronous system controlled by electric etc.
The center pivot irrigation system is especially applied in the irrigation of planing potatoes,sugarcanes,watermelons,legumes,economic crops and pasture.The automated irrigation system characterize high in efficiency ,Featuring in high efficiency ,power and water saving ,the irrigator can increase yield at economical cost with the spraying uniformity coefficient up to 85%,and take advantages of the uniform application of chemical and fertilizers .The center pivot irrigation system can also work on uneven fields with slopes of up 25%. All parts rust free in 15 years via zinc coating treatment. All running parts shall be operated under the main control system and the fault position shall be displayed when malfunction and /or interrution happens.

River and bore ept can be the water resource of the fixed point, the water transports through main pipes and sprinklers, finally applied to the field. The advantage of this irrigation system is to use less labor and water to irrigate 13-130ha from one water feeding point. Steel structure of special design can satisfy different lengths of the machine. One span with one overhang is the simplest machine you can choose for small land. The heavy duty design can be extend to more than 11 spans (650m) with the angles and bolt pivot anchors strong enough to fight windstorm.

SPECIFICATION

Items	Specification	Items	Specification
Pivot length	41.1-791.2m	Land covered	0.53-196.7ha
Qty.of spans	1-16	Span length choice	41.1/47.8/54.4/61.3m
Overhang length	6.7/13.4/20.1/26.8m	Pivot clearance	2.91-3.75m
Span dia.	141/168/203mm	Pivot height	4.62-5.46m
Span thickness	3mm	Surface	Hot dip galvanization
Flow rate	15-1080m3/hr	Water pressure at pivot base	1-7.5Bar
Friction Loss	0-2.5bar	Tire	Rubber: 320X1260 mm Plastic: 318X1170 mm
Max speed	142m/hr	Sprinkler	Nelson/Senninger
Regulator	10/15psi	Type of drops	Flex 5.5-ft drops
Gear box	50:1 heavy duty	Gear motor	33rpm(full loaded) at 380V.3/4HP 40:1 Ratio. Over-heating protection
Control panel	Standard	Required run power	0.7-11.5kw
Power supply	380V 415V 50HZ 60HZ	Irrigation Hours/Day	0-24hr/day
Daily applicationrate	0-50mm/day	Pressure gage	0-60ps

FEATHERS
This center pivot irrigation system can even walk in the waving land.
1 Metallic zinc-coated Spans rubber-band united between itself
2 Mounted on support of intermediate towers-each with two wheels
3 -type, axles drive unit from electric geared motor to Wheels gearboxes
4 Electronic block of the system with equalization and checking
5 Control transformer
6 Monitoring indicators
7 Fuses – 30 amps
8 System monitors
9 Fused disconnect in panel rated 600v at 30 amps
10 Forward / reverse contactors rated 600v at 30 amps

Heavy duty gear box
1 Enhanced casing design, increase intensity, reduce wear and tear
2 Special seal, prevent dist and humidity
3 Large power output bearing, load capacity enhances 55%
4 High-strength cast iron, big gear design
5 Shorten driven wheel design, reduce extra load
6 High-strength caps pre-commitment load

PHOTOS OF IRRIGATION SYSTEM

COMPANY INTRODUCTION
HangZhou Harvest Machinery Co., Ltd is a leading manufacturer in China for irrigation equipments.
The main products of our company include center pivot irrigation system, fixed pivot irrigation system, towable center pivot irrigation system, lateral move irrigation system and small size center pivot irrigation system, and water hose reel irrigation machine.
We strives to provide first-class quality products and friendly service with rich experience of finish machining.
“Good Quality, Reasonable Price, Best Service” is our goal. We warmly and sincerely welcome customers all over the ept to visit our factory and look forward to establishing long term cooperation and solid relationship to make mutual benefit.
For more information, please feel free to contact us.

PACKAGE AND DELIVERY
Spare parts packaged by the standard exporting wooden box.
20″, 40″, 40″HQ, 40″ open top, all available.

SERVICE
1. Professional and quick response to your questions within 24 hours.
2. We will communicate with our production dept. and keep you updated about production progress in time.
3. Customized manufacture available for you.
4. Fast delievery to save your time.
5. Good after sale service will eliminate your worry.
6. Long guarantee period of the quality will reduce your cost and trouble.
7. Professional wooden case pac ept and ept shipping control to make your order safe and sound.
8. Full sets of technical documents, instruction manual can be provided.

PAYMENT
Wire transfer: 30% advance by T/T, 70% balance by T/T before shipment.
Letter of credit: by irrevocable letter of credit at sight.
Western union: it is a fast and safe way.

ept TERM
We can do FOB, C&F and CIF for your choice.

CONTACT

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.