DUMP TRAILER Electrical power UNIT- SINGLE ACTING
General Description
This power unit has a energy up gravity down circuit. Commence the motor to extend the cylinder and activate the solenoid valve to retract the circuit. Guide override to solenoid valve can be presented if essential. Also a pressure compen sated flow handle may be additional on the circuit to manage the descent speed in the cylinder.
Remark: Please seek the advice of our income engineer for your distinctive pump displacement, motor electrical power or tank capacity.
Special Notes
1. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean all of the hydraulic elements concerned prior to set up of the energy unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst,which should really also be clean and absolutely free of impurities.N46 hydraulic oil is encouraged.
four. The power unit must be mounted horizontally.
five. Check the oil degree during the tank right after the preliminary working of your energy unit.
six. Oil transforming is required just after the first a hundred operation hrs, afterwards after every single 3000 hours.

DUMP TRAILER Electrical power UNIT-DOUBLE ACTING
Basic Description
This power unit features a power up power down circuit with load holding on each A & B ports. A strain compensatred movement control can be added to circuit to control the decent speed of your cylinder.
Exclusive Notes
one. This energy unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean all the hydraulic components concerned before set up of the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which ought to also be clean and totally free of impurities. N46 hydraulic oil is proposed.
4. The power unit should be mounted horizontally.
5. Check the oil level in the tank after the original operating of the energy unit.
six. Oil changing is needed after the original a hundred operation hours, afterwards once every 3000 hours.